Bioremediation Clean Properties

TEL: (781) 547-5656



oxygen concentratorbacteria in drumoxygenating in-situbacteria slidetreatment tank

MGL c. 21E & Massachussetts Contigency Plan Consulting, Risk Assessment, ASTM Environmental Site Assessment, Oil & Hazardous Waste Site Cleanup, Vapor Intrusion Mitigation, Telemetry/Remote Monitoring, Oil Tank Removal, Subsurface Investigation, Monitoring, Injection & Recovery Well Installation


The Bugssoil treatment with bacteria

Clean Properties has been using bacteria as a means of removing petroleum and chlorinated hydrocarbons from the environment for many years.

Clean Properties works with facultative bacteria blends, meaning that they can survive under both aerobic (with oxygen) and anaerobic (low to no oxygen) conditions. As the availability of oxygen in the subsurface changes due to changing site conditions, the bacteria are capable of adapting to the changing micro-environments. So what does that mean for you? These bacteria have a better chance of surviving than many of the popular blends that are anaerobic only, so they can continue to thrive and break down contamination when other populations may die off, which would necessitate additional costly rounds of applications. 

Fully Equipped

Clean Properties has the equipment on hand to get your project going. Whether you are starting from scratch or already have injection wells installed at your site, Clean Properties has the ability to pick up a project at any point and move it forward toward completion. Carrying a wide variety of bioremediation equipment enables us to choose and implement the appropriate application method for your project quickly, be it direct-application, injection, recirculation, or soil mixing. We also carry the equipment needed to alter existing environmental conditions to make them more favorable for bioremediation.

kodiac injection setup

The Know-how

Clean Properties has successfully employed bacteria to clean soils and groundwater impacted by oil and hazardous waste in many challenging situations. Just placing the bacteria in the ground alone usually does not result in the desired breakdown of targeted pollutants. Oxidation-reduction potential, dissolved oxygen content, nutrient availability and baseline contaminant concentrations are just a few variables that must be considered and may require adjustment to achieve the desired outcome.

Aside from these parameters, getting the bacteria where they need to be can often be a challenge. Determining the proper means of application to ensure adequate contact with contamination is crucial. Soil type, porosity and transmissivity are a few criterion to keep in mind when designing a remedial approach.

In some situations, it is better to pump groundwater to control the migration of contamination, but then you must find a means to manage the contaminated water. Clean Properties carries all the equipment and licenses necessary to treat and discharge groundwater on-site to help reduce disposal costs. Locate contamination beneath a building and you'll want to be sure that you are working with someone who has expertise in this area, as Clean Properties does, so you get the most cost effective means of achieving your remedial goals.